Shop
-
IF-32130 Ironer & Folder 32″ Roller 130″ Working width 208-240/60/3
Original price was: $188,110.00.$167,417.90Current price is: $167,417.90.CALL FOR LEAD TIME AND MORE ACCURATE FREIGHT PRICING 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Optional stacker on the left or right, front or rear return
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Many safety features:
Standard Features
- 20 different programs
- Bypass for front or rear exit
- Gas heated models for natural or propane gas
- Self cleaning fans
- Automatic cool down
- Variable speed drive with soft starting
- Electronic digital temperature control
- Electrical and mechanical safety devices
- Over 500 pounds per hour produced (if using high speed B&C washers)
- Small machine footprint, just over 100 square feet required
- IF-Commercial-Ironer-Feeder-Folder-Brochure
- IF-32130-General-Specifications
- IF-32130-Fact-Sheet
Optional Features
- Stacker
- Steam Heated
- Automatic spreader/feeder
- Vacuum table
- 2 or 4 lanes
-
Add to cart -
IF-24130 Ironer & Folder 24″ Roller 130″ Working width 208-240/60/3
Original price was: $168,890.00.$150,312.10Current price is: $150,312.10.CALL FOR LEAD TIME AND MORE ACCURATE FREIGHT PRICING 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Optional stacker on the left or right, front or rear return
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Many safety features:
Standard Features
- 20 different programs
- Bypass for front or rear exit
- Gas heated models for natural or propane gas
- Self cleaning fans
- Automatic cool down
- Variable speed drive with soft starting
- Electronic digital temperature control
- Electrical and mechanical safety devices
- Over 500 pounds per hour produced (if using high speed B&C washers)
- Small machine footprint, just over 100 square feet required
- IF-Commercial-Ironer-Feeder-Folder-Brochure
- IF-24130-General-Specifications
- IF-24130-Fact-Sheet
Optional Features
- Stacker
- Steam Heated
- Automatic spreader/feeder
- Vacuum table
- 2 or 4 lanes
-
Add to cart -
IC-20130 Roll Ironer 130 inches width 20″ roller Gas Heating 120V
Original price was: $48,050.00.$45,647.50Current price is: $45,647.50.Call for more accurate Freight Pricing 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Goods return to the operator
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Dual thermostats
- Many safety features:
Standard Features
- Gas heating Propane or Natural Gas
- Variable speed drive with soft starting
- Electronic digital temperature control
- Full exhaust canopy with internal blower
- Electrical and mechanical safety devices
- IC-20-Commercial-Ironer-Brochure
- IC-20-Commercial-Ironer-General-Specifications
Optional Features
- Chrome plated ironing cylinder
- Humidity sensing auto speed control
- Single phase electrical
- Reversing cylinder
- Radiant burner
- Custom options as required – consult factory
-
Add to cart -
IC-1379 Roll Ironer 79 inches width 13″ roller Gas Heating 120V
Original price was: $20,995.00.$19,945.25Current price is: $19,945.25.Call for more accurate Freight Pricing 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Goods return to the operator
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Dual thermostats
- Many safety features:
Standard Features
- Gas heating Propane or Natural Gas
- Variable speed drive with soft starting
- Electronic digital temperature control
- Full exhaust canopy with internal blower
- Electrical and mechanical safety devices
- IC-13-Commercial-Ironer-Brochure
- IC-13-Commercial-Ironer-General-Specifications
Optional Features
- Chrome plated ironing cylinder
- Humidity sensing auto speed control
- Single phase electrical
- Reversing cylinder
- Radiant burner
- Custom options as required – consult factory
-
Add to cart -
IC-1363 Roll Ironer 63 inches width 13″ roller Gas Heating 120V
Original price was: $19,385.00.$18,415.75Current price is: $18,415.75.Call for more accurate Freight Pricing 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Goods return to the operator
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Dual thermostats
- Many safety features:
Standard Features
- Gas heating Propane or Natural Gas
- Variable speed drive with soft starting
- Electronic digital temperature control
- Full exhaust canopy with internal blower
- Electrical and mechanical safety devices
- IC-13-Commercial-Ironer-Brochure
- IC-13-Commercial-Ironer-General-Specifications
Optional Features
- Chrome plated ironing cylinder
- Humidity sensing auto speed control
- Single phase electrical
- Reversing cylinder
- Radiant burner
- Custom options as required – consult factory
-
Add to cart -
IC-8 Roll Ironer 55 inches width 8″ roller Electric Heating 208-240/60/3
Original price was: $12,065.00.$11,461.75Current price is: $11,461.75.Call for more accurate Freight Pricing 1-844-492-7447
Features at a Glance:
- Easy to use controls
- Nomex padding and belts
- Built in exhaust
- Heavy duty frame
- Fully enclosed for heat retention
- Goods return to the operator
- Many safety features:
- Circuit protection
- Interlocked panels
- Emergency stops
- Finger safety
- Dual thermostats
- Many safety features:
Standard Features
- Electric heating
- Variable speed drive with soft starting
- Electronic digital temperature control
- Full exhaust canopy with internal blower
- Electrical and mechanical safety devices
- IC-8-Commercial-Ironer-Brochure (1)
-
Add to cart -
Door Mounted Hook Rack FC 20
Original price was: $250.00.$195.00Current price is: $195.00.This hook rack is perfect for drying smaller garments such as gloves, socks, masks etc. It is easily mounted on the drying cabinets door’s inside. It comes as a set of 3 with 4 hooks on each rack.
-
Add to cart -
Rack for Boots FC 20
Original price was: $395.00.$340.00Current price is: $340.00.The hangers in the drying cabinet can easily be switched to racks for drying boots. The drying cabinet distributes hot air within the drying cabinet that dries the boots from the outside at the same time as warm air is led through the racks and dries the boots from the inside.
2 pairs of boots/rack.
-
Add to cart -
Rack for Gloves FC 20
Original price was: $380.00.$360.00Current price is: $360.00.This rack for gloves is specially designed for the protective gear drying cabinet, FC 20. The hangers inside the drying cabinet can easily be changed for the racks if you need to dry gloves. The gloves dry fast because warm air is also distributed through the racks into the gloves.
4 pairs of gloves/rack.
-
Add to cart -
FC-20 Fire Gear Dryer Cabinet
Original price was: $10,950.00.$9,855.00Current price is: $9,855.00.Call us for lead time and accurate Freight Quote
1-844-492-7447
Standard Features
- Dries from the inside and outside
- Programmable control
- Handles 6 overalls
- Interior lighting
- Gentle drying
- Detachable hangers
- 60 month warranty on Major Components
- 36 month warranty All other non wear parts
- Firehouse Brochure
- FC Competitive Comparison
- FC18-04 WhyUseCabinet
- FC18-05 DampDirty Gear is Dangerous
- FC-Firemans-Drying-Cabinet-Brochure
- FC-20-firemans-drying-cabinet-specifications
Optional Features
- Racks for Gloves
- Racks for Boots
- Racks for Garments
-
Add to cart -
DI-475 475LB Industrial Gas Dryer Microprocessor Controlled
Original price was: $110,430.00.$104,908.50Current price is: $104,908.50.Standard Features:
- Stainless Steel Drying Cylinder
- Microprocessor Control
- Large Capacity Slide Out Lint Drawer
- Sealed Bearings
- Reversing Cylinder
- Rotation Sensor
Optional Features:
- 1 or 2 Way Tilting
- Humidity Sensing / Autodry
- Variable Frequency Drive
- Fire Suppression System
- Vertical or Horizontal Sliding Doors
- Pass Through System with Front and Rear Doors
- Side Mounted Steam Coils
- Tunnel System Integration
- Custom Controls
- Air Recirculation System
- Automatic Blower Cleaning
-
Add to cart -
DI-325 325LB Industrial Gas Dryer Microprocessor Controlled
Original price was: $59,350.00.$56,382.50Current price is: $56,382.50.Standard Features:
- Stainless Steel Drying Cylinder
- Microprocessor Control
- Large Capacity Slide Out Lint Drawer
- Sealed Bearings
- Reversing Cylinder
- Rotation Sensor
Optional Features:
- 1 or 2 Way Tilting
- Humidity Sensing / Autodry
- Variable Frequency Drive
- Fire Suppression System
- Vertical or Horizontal Sliding Doors
- Pass Through System with Front and Rear Doors
- Side Mounted Steam Coils
- Tunnel System Integration
- Custom Controls
- Air Recirculation System
- Automatic Blower Cleaning
-
Add to cart -
DI-225 255LB Industrial Gas Dryer Microprocessor Controlled
Original price was: $47,895.00.$45,500.25Current price is: $45,500.25.Standard Features:
- Stainless Steel Drying Cylinder
- Microprocessor Control
- Large Capacity Slide Out Lint Drawer
- Sealed Bearings
- Reversing Cylinder
- Rotation Sensor
Optional Features:
- 1 or 2 Way Tilting
- Humidity Sensing / Autodry
- Variable Frequency Drive
- Fire Suppression System
- Vertical or Horizontal Sliding Doors
- Pass Through System with Front and Rear Doors
- Side Mounted Steam Coils
- Tunnel System Integration
- Custom Controls
- Air Recirculation System
- Automatic Blower Cleaning
-
Add to cart -
DP-250 250LB Industrial Gas Dryer Microprocessor Controlled
Original price was: $41,435.00.$39,363.25Current price is: $39,363.25.CALL FOR MORE ACCURATE FREIGHT QUOTE. UNIT IS CUSTOM BUILT AND LEAD TIMES ARE 6-10 WEEKS.
Standard Features:
- Microprocessor control
- 1-way Tilt
- Reversing cylinder
- Heavy duty drive system
- Large door opening
- Cool down
- Overload protection
- High limit safety thermostats
- Soft start
- Stainless steel cylinder
- Rotation sensor
Optional Features:
- Variable frequency drive
- Steam heating
- Gas heating
- Air recirculating system
- Stainless steel front
- Fire suppression system
- Automatic blower cleaning
- Humidity Sensing / Autodry
- Tilt forward for unloading
-
Add to cart -
DP-250 250LB Industrial Gas Dryer Microprocessor Controlled 1 Way Tilt
Original price was: $51,550.00.$48,972.50Current price is: $48,972.50.CALL FOR MORE ACCURATE FREIGHT QUOTE. UNIT IS CUSTOM BUILT AND LEAD TIMES ARE 6-10 WEEKS.
Standard Features:
- Microprocessor control
- 1-way Tilt
- Reversing cylinder
- Heavy duty drive system
- Large door opening
- Cool down
- Overload protection
- High limit safety thermostats
- Soft start
- Stainless steel cylinder
- Rotation sensor
Optional Features:
- Variable frequency drive
- Steam heating
- Gas heating
- Air recirculating system
- Stainless steel front
- Fire suppression system
- Automatic blower cleaning
- Humidity Sensing / Autodry
- Tilt forward for unloading
-
Add to cart -
DP-200 200LB Industrial Gas Dryer Microprocessor Controlled 1 Way Tilt
Original price was: $45,330.00.$43,063.50Current price is: $43,063.50.CALL FOR MORE ACCURATE FREIGHT QUOTE. UNIT IS CUSTOM BUILT AND LEAD TIMES ARE 6-10 WEEKS.
Standard Features:
- Microprocessor control
- 1-way Tilt
- Reversing cylinder
- Heavy duty drive system
- Large door opening
- Cool down
- Overload protection
- High limit safety thermostats
- Soft start
- Stainless steel cylinder
- Rotation sensor
- DP-200 Tilt General Specifications
Optional Features:
- Variable frequency drive
- Steam heating
- Gas heating
- Air recirculating system
- Stainless steel front
- Fire suppression system
- Automatic blower cleaning
- Humidity Sensing / Autodry
- Tilt forward for unloading
-
Add to cart -
DP-200 200LB Industrial Gas Dryer Microprocessor Controlled
Original price was: $35,215.00.$33,454.25Current price is: $33,454.25.CALL FOR MORE ACCURATE FREIGHT QUOTE. UNIT IS CUSTOM BUILT AND LEAD TIMES ARE 6-10 WEEKS.
Standard Features:
- Microprocessor control
- Reversing cylinder
- Heavy duty drive system
- Large door opening
- Cool down
- Overload protection
- High limit safety thermostats
- Soft start
- Stainless steel cylinder
- Rotation sensor
- 290 – DP-200
Optional Features:
- Variable frequency drive
- Steam heating
- Gas heating
- Air recirculating system
- Stainless steel front
- Fire suppression system
- Automatic blower cleaning
- Humidity Sensing / Autodry
- Tilt forward for unloading
-
Add to cart -
DE-170 170LB Gas Dryer 208-240/60/3 Manual Timer Controlled
Original price was: $20,390.00.$19,370.50Current price is: $19,370.50.CALL US FOR MORE ACCURATE FREIGHT PRICE. 1-844-4WASHIQ
Standard Features: (Unit looks slightly different than picture.
- Stainless Steel Drying Cylinder
- Manual Timers
- 4 Temperatures
- Heavy Duty Drive System
- Large Loading Door
- Designed to Save Money
- 286 – DE Gas General Specs
Optional Features:
- Microprocessor Control
- Reversing Cylinder (Standard on DE-120 and DE-170)
- Rotation Sensor
- Humidity Sensing / Autodry
- Stainless Steel Front
- Fire Suppression System
-
Add to cart -
DE-120 120LB Gas Dryer 208-240/60/3 Manual Timer Controlled
Original price was: $14,630.00.$13,898.50Current price is: $13,898.50.CALL US FOR MORE ACCURATE FREIGHT PRICE. 1-844-4WASHIQ
Standard Features: (Unit looks slightly different than picture.
- Stainless Steel Drying Cylinder
- Manual Timers
- 4 Temperatures
- Heavy Duty Drive System
- Large Loading Door
- Designed to Save Money
- 286 – DE Gas General Specs
Optional Features:
- Microprocessor Control
- Reversing Cylinder (Standard on DE-120 and DE-170)
- Rotation Sensor
- Humidity Sensing / Autodry
- Stainless Steel Front
- Fire Suppression System
-
Add to cart -
SB-480 480lb Soft Mount Barrier Washer 330G Microprocessor Controlled
Original price was: $242,210.00.$230,099.50Current price is: $230,099.50.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- 30 cycle microprocessor
- Up to 330G extraction
- Variable speed inverter drive
- Stainless steel panels Specifications
- SB-485 General Spec
Optional Features:
- Water reuse inlet and drain
- Direct steam heating
- EMI filter
- PC programming kit
-
Add to cart -
SB-300 300lb Soft Mount Barrier Washer 350G Microprocessor Controlled
Original price was: $167,585.00.$159,205.75Current price is: $159,205.75.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- 30 cycle microprocessor
- Up to 350G extraction
- Variable speed inverter drive
- Stainless steel panels Specifications
- SB-300 General Spec
Optional Features:
- Water reuse inlet and drain
- Direct steam heating
- EMI filter
- PC programming kit
-
Add to cart -
SB-225 225lb Soft Mount Barrier Washer 350G Microprocessor Controlled
Original price was: $136,150.00.$129,342.50Current price is: $129,342.50.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- 30 cycle microprocessor
- Up to 350G extraction
- Variable speed inverter drive
- Stainless steel panels Specifications
- SB-225 General Spec
Optional Features:
- Water reuse inlet and drain
- Direct steam heating
- EMI filter
- PC programming kit
-
Add to cart -
SB-155 155lb Soft Mount Barrier Washer 350G Microprocessor Controlled
Original price was: $89,680.00.$85,196.00Current price is: $85,196.00.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- 30 cycle microprocessor
- Up to 350G extraction
- Variable speed inverter drive
- Stainless steel panels Specifications
- SB-155 General Spec
Optional Features:
- Water reuse inlet and drain
- Direct steam heating
- EMI filter
- PC programming kit
-
Add to cart -
SB-80 80lb Soft Mount Barrier Washer 350G Microprocessor Controlled
Original price was: $67,950.00.$64,552.50Current price is: $64,552.50.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- 30 cycle microprocessor
- Up to 350G extraction
- Variable speed inverter drive
- Stainless steel panels Specifications
- SB-80 General Spec
Optional Features:
- Water reuse inlet and drain
- Direct steam heating
- EMI filter
- PC programming kit
-
Add to cart -
SA-475 475lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $192,715.00.$183,079.25Current price is: $183,079.25.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 40 inch door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Standard 2 way tilt
- Stainless steel panels
- Water reuse capable
- Direct steam heating Specifications
- 742 – SA-475 General Dimensions
Optional Features:
- Water reuse inlet and drain
- EMI filter
- PC programming kit
-
Add to cart -
SI-300 300lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $111,895.00.$106,300.25Current price is: $106,300.25.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- Large door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Stainless steel panels
- Water reuse capable
Optional Features:
- Tilting, 1 or 2 way
- Direct steam heating
- Air cushion suspension
- Water reuse inlet and drain
- EMI filter
- PC programming kit
- SI-300-Industrial-Washer-General-Specifications
-
Add to cart -
SI-275 275lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $89,850.00.$85,357.50Current price is: $85,357.50.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- Large door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Stainless steel panels
- Water reuse capable
Optional Features:
- Tilting, 1 or 2 way
- Direct steam heating
- Air cushion suspension
- Water reuse inlet and drain
- EMI filter
- PC programming kit
- SI-275-Industrial-Washer-General-Specifications
-
Add to cart -
SI-200 200lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $74,750.00.$71,012.50Current price is: $71,012.50.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- Large door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Stainless steel panels
- Water reuse capable
Optional Features:
- Tilting, 1 or 2 way
- Direct steam heating
- Air cushion suspension
- Water reuse inlet and drain
- EMI filter
- PC programming kit
- SI-135-Industrial-Washer-General-Specifications
-
Add to cart -
SI-135 135lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $56,870.00.$54,026.00Current price is: $54,026.00.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- Large door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Stainless steel panels
- Water reuse capable
Optional Features:
- Tilting, 1 or 2 way
- Direct steam heating
- Air cushion suspension
- Water reuse inlet and drain
- EMI filter
- PC programming kit
- SI-135-Industrial-Washer-General-Specifications
-
Add to cart -
SI-110 110lb Soft Mount Industrial Washer 320G Microprocessor Controlled
Original price was: $39,540.00.$37,563.00Current price is: $37,563.00.Will ship out from Factory unit is custom built call for time frames and build schedule. 1-844-4WASHIQ
Standard Features:
- Heavy duty construction
- All wetted parts are 304 (18/8) stainless steel
- 5 compartment supply dispenser
- Large door opening
- 30 cycle microprocessor
- 320G extraction force
- 3 degree lean back for strength and easier loading
- Air operated door gasket
- Variable speed inverter drive
- Dry zone bearings
- Stainless steel panels
- Water reuse capable
Optional Features:
- Tilting, 1 or 2 way
- Direct steam heating
- Air cushion suspension
- Water reuse inlet and drain
- EMI filter
- PC programming kit
- SI-110-Industrial-Washer-General-Specifications
-
Add to cart -
SP-195 195lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $61,760.00.$58,672.00Current price is: $58,672.00.Will ship out from Factory with in 3 weeks from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-195-Commercial-Washer-General-Specifications
-
Add to cart -
SP-165 165lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $49,840.00.$47,348.00Current price is: $47,348.00.Will ship out from Factory with in 3-4 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-165-Commercial-Washer-General-Specifications
-
Add to cart -
SP-135 135lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $41,545.00.$39,467.75Current price is: $39,467.75.Will ship out from Factory with in 3-4 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-135-Commercial-Washer-General-Specifications
-
Add to cart -
SP-110 110lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $31,860.00.$30,267.00Current price is: $30,267.00.Will ship out from Factory with in 2-3 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-110-Commercial-Washer-General-Specifications
-
Add to cart -
SP-75 75lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $21,325.00.$20,258.75Current price is: $20,258.75.Will ship out from Factory with in 2-3 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-75-Commercial-Washer-General-Specifications
-
Add to cart -
SP-65 65lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $19,395.00.$18,425.25Current price is: $18,425.25.Will ship out from Factory with in 2-3 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-65-Commercial-Washer-General-Specifications
-
Add to cart -
SP-50 50lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $16,585.00.$15,755.75Current price is: $15,755.75.Will ship out from Factory with in 2-3 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-50-Commercial-Washer-General-Specifications
-
Add to cart -
SP-45 45lb Soft Mount Commercial Washer 350G Microprocessor Controlled
Original price was: $15,645.00.$14,862.50Current price is: $14,862.50.Will ship out from Factory with in 2-3 months from time of order.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser
- 30 cycle microprocessor
- 350G extraction force
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wet Cleaning functionality built in – no special options required
- Designed to save money
- SP-45-Commercial-Washer-General-Specifications
-
Add to cart -
HP-125 125lb Hard Mount Commercial Washer 200G Microprocessor Controlled
$39,295.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory, ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser (HP-65)
- 5 compartment supply dispenser (HP-125)
- 30 cycle microprocessor
- 300G extraction force (HP65)
- 200G extraction force (HP125)
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wetcleaning functionality built in – no special options required
- HP-125-Commercial-Washer-General-Specifications
-
Add to cart -
HP-65 65lb Hard Mount Commercial Washer 300G Microprocessor Controlled
$19,340.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory, ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- All wetted parts are 304 (18/8) stainless steel
- 1 compartment supply dispenser (HP-65)
- 5 compartment supply dispenser (HP-125)
- 30 cycle microprocessor
- 300G extraction force (HP65)
- 200G extraction force (HP125)
- 5 degree lean back for strength and easier loading
- Built in vacuum breaker
- Variable speed inverter drive
- Wetcleaning functionality built in – no special options required
- HP-65-Commercial-Washer-General-Specifications
-
Add to cart -
HE-110 110lb Hard Mount Commercial Washer 200G Microprocessor Controlled
$26,765.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory, ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- Advanced FM7 control, 30 programmable cycles
- Extract force 200G
- 4 compartment supply dispenser for dry and liquid chemicals
- 8 connections for liquid chemical supply
- Stainless steel front and top. All parts in contact with wash solution are 304 (18/8) stainlees steel
- Prepared for direct steam injection (Steam option can be added later without welding)
- Programmable variable speed inverter
- Single motor drive
- Cool down
- Programmable speeds
- Programmable water levels
- Programmable water temperature
- Rear drain connection
- Electrical system standard: 208-230V/60/1, 208-230V/60/3, 440-460V/60/3, 380-440V/50/3
- HE-85-Commercial-Washer-General-Specifications
-
Add to cart -
HE-85 85lb Hard Mount Commercial Washer 200G Microprocessor Controlled
$23,365.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory, ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- Advanced FM7 control, 30 programmable cycles
- Extract force 200G
- 4 compartment supply dispenser for dry and liquid chemicals
- 8 connections for liquid chemical supply
- Stainless steel front and top. All parts in contact with wash solution are 304 (18/8) stainlees steel
- Prepared for direct steam injection (Steam option can be added later without welding)
- Programmable variable speed inverter
- Single motor drive
- Cool down
- Programmable speeds
- Programmable water levels
- Programmable water temperature
- Rear drain connection
- Electrical system standard: 208-230V/60/1, 208-230V/60/3, 440-460V/60/3, 380-440V/50/3
- HE-85-Commercial-Washer-General-Specifications
-
Add to cart -
HE-65 65lb Hard Mount Commercial Washer 200G Microprocessor Controlled
$16,250.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory, ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- Advanced FM7 control, 30 programmable cycles
- Extract force 200G
- 4 compartment supply dispenser for dry and liquid chemicals
- 8 connections for liquid chemical supply
- Stainless steel front and top. All parts in contact with wash solution are 304 (18/8) stainlees steel
- Prepared for direct steam injection (Steam option can be added later without welding)
- Programmable variable speed inverter
- Single motor drive
- Cool down
- Programmable speeds
- Programmable water levels
- Programmable water temperature
- Rear drain connection
- Electrical system standard: 208-230V/60/1, 208-230V/60/3, 440-460V/60/3, 380-440V/50/3
- HE-65-Commercial-Washer-General-Specifications
-
Add to cart -
HE-45 45lb Hard Mount Commercial Washer 200G Microprocessor Controlled
$13,555.00DISCOUNT OF 15% WILL BE APPLIED TO ALL CALIFORNIA SHIPPING ADDRESSES IN THE CART
CALL US FOR MORE INFORMATION @ 1-844-4WASHIQStandard features:
Will ship out from Factory. ONLINE PRICE ONLY. ORDER IS NOT REFUNDABLE ONCE ORDER IS PLACED. CUSTOMER AGREES TO THESE NO REFUND TERMS BY PLACING ORDER AS MACHINE IS BUILT PER ORDER.
Standard features:
- Advanced FM7 control, 30 programmable cycles
- Extract force 200G
- 4 compartment supply dispenser for dry and liquid chemicals
- 8 connections for liquid chemical supply
- Stainless steel front and top. All parts in contact with wash solution are 304 (18/8) stainlees steel
- Prepared for direct steam injection (Steam option can be added later without welding)
- Programmable variable speed inverter
- Single motor drive
- Cool down
- Programmable speeds
- Programmable water levels
- Programmable water temperature
- Rear drain connection
- Electrical system standard: 208-230V/60/1, 208-230V/60/3, 440-460V/60/3, 380-440V/50/3
- HE-45-Commercial-Washer-General-Specifications
-
Add to cart